REMOVING AND INSTALLING
COIL SPRING

Remove wheel - see Gr. 36.
Remove muffler - see Gr. 18.
Unscrew brake caliper - see Gr. 34.


Siehe auch 36 10 000
Siehe auch 18 12 000
Siehe auch 34 11 000
 
Support final drive from underneath
with a transmission lifter*.
Pull off plug.


Siehe auch * Source of Supply: HWB
133011 - click to zoom
 
Unscrew nut (1) and lower lifter.

Installation:
Use stop washers (2) at top and
bottom.
Tightening torque = 180 Nm
(130 ft. lbs.).

133012 - click to zoom
 
Support trailling arm from underneath
with a lifter.
Unscrew bolt.

Installation:
Use washers (1).
Tightening torque = 77 Nm (56 ft. lbs.)
with car in normal position (see Gr. 32
Specifications).


Siehe auch See Specifications
133017 - click to zoom
 
Pull out coil spring from the side.
Check upper/lower spring rings and
rubber damper for damage, replacing if
necessary.

Installation:
Coat upper spring ring with a lubricant.
Check for correct seating of spring
rings.

133020 - click to zoom