Support final drive from underneath with a transmission lifter*. Pull off plug. * Source of Supply: BMW Parts | |
Unscrew nut (1) and lower lifter. Installation: Use stop washers (2) at top and bottom. Tightening torque = 180 Nm. | |
Support trailing arm from underneath with a lifter. Unscrew bolt. Installation: Use washers (1). Tightening torque = 100 Nm with car loaded down to normal position (see Specifications for Group 32). See Specifications | |
Pull out coil spring from the side. Check upper/lower spring rings and rubber damper for damage, replacing if necessary. Installation: Coat upper spring ring with a lubricant. Check for correct seating of spring rings. |