REPLACING FINAL
MUFFLER

Unscrew muffler assembly on the
flanges.

Installation:
Check gaskets, replacing if necessary.
Replace self-locking nuts.
Align flanges parallel.
Tightening torque = 22 Nm (16 ft. lbs.).

118001 - click to zoom
 
Installation:
Different gaskets.
The wide seal seats on the connector
of the right pipe.

118002 - click to zoom
 
Support the final muffler with a lifting
fixture.
Unscrew suspension on left and right
sides.
Lift off the final muffler.

118003 - click to zoom
 
Installation:
Align retaining pins to be parallel to
the rubber mounts.

118011 - click to zoom
 
Installation:
Align tailpipe in the body opening.
Vertically on the rear suspension
points.
Horizontally by loosening and adjusting
on the connection flanges.

118004 - click to zoom