REMOVING AND INSTALLING
OR REPLACING ONE FRONT
PULSE SENDER (SPEED
SENSOR FOR ABS)

Note:
See replacing main wire harness in
Group 61.

Turn off ignition.
Unscrew socket head screw.


Siehe auch 61 11 000
3034111 - click to zoom
 
Pull out pulse sender.

Installation:
Check pulse sender for damage,
replacing if necessary.
Lubricate pulse sender and housing
with Molykote Longterm 2 prior to
installation.
Spacing for pulse senders is given by
the take-up bore.

3034112 - click to zoom
 
Replacing Pulse Sender:
Disconnect plug in engine compartment
and push electric lead through
downward.
Lift out electric lead on holder.
Check function of ABS - see Gr. 34.


Siehe auch 34 52 000
134058X - click to zoom
 
Removing and Installing/Replacing
Front Pulse Wheel for ABS:
The front pulse wheel can only be
replaced in conjunction with the
bearing unit - see replacing wheel hub
in Group 31.


Siehe auch 31 00 000
134055 - click to zoom