REPLACING CONTROL UNIT
FOR ABS

Cuation!
Turn off ignition before removing or installing
control unit.

134047 - click to zoom
 
Push back clamp (1) and pull out multiple-pin
plug (2) to the right, and then disconnect to
the left.
Remove control unit from electronic box.

134048 - click to zoom
 
Check for correct connections when replacing
a control unit.
Mulitple-pin plug has a tab on its left side, for
which the control unit must have an opening.
Important!
Only use a control unit with the specified code
nr. 1 158 575 or
Bosch nr. 0265 103 040.

134049 - click to zoom
 
Installation:
First engage left side of plug and then press
right side into clamp.
Check operation of ABS.

134052 - click to zoom