REMVONG AND INSTALLING ACCELERATOR PEDAL SHAFT Remove bottom trim of clutch pedal - see Gr. 51. 51 43 000 | |
Disconnect throttle cable (1). | |
Lift out retainer (2). | |
Disconnect spring (3). Slide bearing sleeves (4 and 5) to the side. Lift out accelerator pedal shaft. Turn to guide tab through opening in the accelerator pedal. | |
Turn accelerator pedal shaft (9) in such a manner that tab (6) can be taken out through opening (7) in the accelerator pedal (8). | |
Installation: Check bearing sleeves, replacing if necessary. Lubricate all sliding surfaces lightly with grease. Approved lubricants - see 35-00. 35 00 000 |