REPLACING THROTTLE
VALVE OPERATING CABLE

Remove bottom trim panel for dashboard -
see Gr 51.
Disconnect accelerator cable (1) on
pedal shaft.

Installation:
Check rubber grommet, replacing if
necessary.
See 35-00 for accelerator cable
adjusting procedures.


Siehe auch 51 43 000
Siehe auch 35 00 000
3235027 - click to zoom
 
Compress retainers and pull cable out
of engine compartment wall into the
engine compartment.

51835061 - click to zoom
 
1 = Accelerator cable
2 = Throttle valve lever
3 = Holder

135009 - click to zoom
 
Unclip holder of accelerator cable in
throttle valve lever.

135010 - click to zoom
 
Remove accelerator cable downward
through slot in the throttle valve lever.

135011 - click to zoom
 
Take nipple of accelerator cable out of
holder.
Unscrew lock nut and knurled nut.

135012 - click to zoom
 
Pull accelerator cable out of holder.

135013 - click to zoom