REPLACING UPPER TRAILING
ARM BALL JOINT
- Trailing Arm Removed -

The ball joint can also be replaced without
removing the trailing arm.

Important!
Rear wheel alignment must be checked
after installation - see Gr. 32.


32 00 000

Measure and note protrusion (A) of old ball
joint.

Pull out ball joint with Special Tools
33 3 331, 33 3 332 and 33 3 333.

Pull in new ball joint (1) up to the previously
measured distance of protrusion (A)
using Special Tools 33 3 332, 33 3 333 and
33 3 334.