REPLACING LOWER TRAILING
ARM RUBBER MOUNT
- Trailing Arm Removed -

The rubber mount can also be replaced
without removing the trailing arm.

Important!
The rear wheel alignment must be checked
after installation - see Gr. 32.


32 00 000

Measure and note protrusion (A) of the old
rubber mount.

Pull out rubber mount with Special Tools
33 3 331, 33 3 332 and 33 3 333.

Pull in new rubber mount up to the previously
measured distance of protrusion (A)
using Special Tools 33 3 332, 33 3 333 and
33 3 334.