REMOVING AND INSTALLING CONTROL ARM Remove front wheel - see Gr. 36. Unscrew holder for control arm. Installation: S = washer Tightening torque = 42 Nm for 8.8 bolts 47 Nm for 9.8 bolts 36 10 000 | |
Unscrew push rod on stabilizer. Installation: Tightening torque = 59 Nm. | |
Unscrew nut. | |
Knock joural loose with a plastic hammer. Installation: Replace self-locking nut. Clean journals and bores to remove grease. Push up ball joint using a transmission lifter to make tightening the nut easier. Tightening torque = 85 Nm. | |
Unscrew nut and press off guide joint with Special Tool 31 1 110. Installation: Clean journals and bores to remove grease. Replace self-locking nut. Tightening torque = 62 Nm. |