Mark location of lock shaft holders (with a scrible) when reusing the same parts. Installation: Check whether lock shaft moves easily. The lock shaft must turn back to the middle position on its own. |  |
Remove the unlocking mechanism for the convertible top lid. Unscrew lock shaft holder screws on the A-pillar. |  |
Push back lock shaft and swing the front holder past the door guide rail. Take off lock shaft. |  |
Installation: Place lock shaft on a level surface and check whether catch bolts are aligned uniformly. Reassemble the lock shaft when necessary. | |
Check the installed direction of the lock shaft holder on the B-pillar. |  |
Adjusting Lock Shaft When Using New Parts: Install lock shaft and lock. Use spacers on the staybolts of the B-pillar between the body and lock. The thickness of required spacers is given at the place of installation. Press lock (1) into middle position against the body and tighten screws (2) of the lock shaft holder. |  |
Tighten screws of the front lock shaft holder in middle position. |  |
51 33 000