REMOVING AND INSTALLING LOWER CONTROL ARM Important! Rear wheel alignment must be checked after installation - see Gr. 32. Unsrew nut and pull off control arm. Installation: Use washer (1). Tightening torque = 100 Nm. 32 00 000 | |
Mark the location of the eccentric bolt to the axle carrier by punching. Unscrew nut. Installation: Align bolt with punch mark precisely. Tightening torque = 77 Nm. | |
1 Axle carrier 2 Self-locking nut 3 Eccentric bolt 4 Lower control arm 5 Eccentric bolt |