REMOVING AND INSTALLING PARKING BRAKE SHOES Remove rear brake discs - see 34 21. Disconnect upper return spring with a brake spring pliers. 34 21 000 | |
Turn holding spring 90° with Special Tool 34 4 000 and disconnect them. | |
Pull brake shoes apart at bottom and take off from above. Important! Pin for expander lock might fall out. After Replacing Liners: Break in to same procedures as for replacing brake discs - see 34 21. 34 21 000 | |
Remove and check expander lock. Pull part A forward. Press out pin B. Pull out part C. Important! Extract liner dust - never blow it out. Installation: Give sliding surfaces and pins a thin coat of Molykote Paste G. Adjust parking brake - see 34 10. 34 10 000 |