Connect bleeder on brake fluid tank. Refer to operating instructions sup- plied with pertinent equipment.
Important! Do not use air flushing.
Depress and hold down brake pedal.
Connect bleeder hose with bottle on bleeder screw and open bleeder valve on wheel brake, beginning at right rear. Release brake pedal and then operate it 12 times against the stop.
Hold brake pedal down in floored position. Close bleeder screw when the escaping brake fluid no longer contains air bubbles. Release brake pedal.
Repeat procedures at left rear, right front and left front.
Important! Bleeding without activation of the return delivery pump via Test Step 09 will not be sufficient to have the residual air escape from the control circuit.