REMOVING AND INSTALLING
RADIATOR

Caution!
Danger of scalding! Unscrew cap on
expansion tank only when engine is
cold.
Remove engine splash guard - see
51 47.
Drain and catch coolant

117008 - click to zoom
 
Disconnect top water hose.
Disconnect venting pipe on the
radiator.

117009 - click to zoom
 
Disconnect bottom water hose.
Press engine oil cooler to the left and
detach on the right side.

117010 - click to zoom
 
Detach engine oil cooler on the left
side.
Pipes remain connected.

117011 - click to zoom
 
Pull out expansion rivets at top left
and right.
Pull out fan cowl from above.
 
Installation:
Disengage retainers on left and right
sides and at bottom center.
 
Press on radiator mounts at top left
and right with a screwdriver.
Pull out radiator carefully from above,
pressing the spill pipe out of the
clamps.

117013 - click to zoom
 
Installation:
Insert mounting clamps on the radiator
prior to installation.
Make sure of correct seating on the
bottom rubber mounts when lifting in
the radiator.

117014 - click to zoom