ADJUSTING LINKAGE FOR
DOOR PUSH BUTTON

Note:
A removed convertible top will make
adjustments on the linkage easier.

Requirements:
Door control microswitch and lock are
okay.

 
Open top.
Shut doors and lower door windows.

 
Slide left seat forward and open battery
flap.

151115 - click to zoom
 
1 = Control unit for right door
2 = Control unit for left door

151050 - click to zoom
 
Adjusting Linkage for Left Door Push
Button:
Unlock plug on control unit (2).

Adjusting Linkage for Right Door Push
Button:
Unlock plug on control unit (1).

151116 - click to zoom
 
Pull 26-pin (white) plug off of control
unit and connect on test box 61 1 459
using adapter lead 61 1 452.

Caution!
Don´t connect the control unit.

151117 - click to zoom
 
Connect microswitch tester 61 4 440 to
car´s battery using red and black clips.

Note:
Check function of microswitch tester
by holding yellow and blue plugs together =>
yellow LED must light up.
Then hold green and blue plugs
togehter => green LED must light up.


Connect plugs (blue, green and yellow)
on test box.

Blue = Pin 26
Yellow = Pin 8
Green = Pin 4

151118 - click to zoom
 
Unscrew panel.

151114 - click to zoom
 
Linkage 1 : Central lock emergency operation

Linkage 2 : Lock operation

Adjust linkage (2) until following switch
functions are guaranteed.

151092 - click to zoom
 
Press door oush button as far as stop.
Both LEDs must light up.

151119 - click to zoom
 
Release door push button slowly.
Green LED must go out after travel of
1 to 2 mm.
Yellow LED must still be on.

151120 - click to zoom
 
Disconnect microswitch tester, test
box and adapter leads.
Reconnect control unit plugs.