Disconnect battery. Pull up caps. Unscrew screws. Take off both wiper arms.
Pull off rubber seal. Punch out pin downward. Pull up expansion rivets and lift out left cover.
Unscrew screws (1) and nut (2) on drive lever. Pull off plug and unclip connector in holder. Lift out wiper motor.
Unscrew nuts (1) on both wiper shafts and screw (2) on wiper motor holder. Pull down and lift out wiper console.
Installation: Move motor to final position. Move linkage (1) for driver´s side and drive crank (2) in one direction and mount on the wiper shaft and tighten.