BMW Z1»41 - Body»41 35 000 a - Side panel, middle, left/right - remove and install
REMOVING AND INSTALLING LEFT/RIGHT MIDDLE SIDE PANEL
Unscrew screw of front wheel house panel. Lift front wheel house panel over edge of the side panel.
Unscrew screws.
Unscrew screws of engine compartment splash guard.
Counterhold on guides of the middle side panel. Pull out bottom of side panel over the car jack take-up.
Caution! Guides could tear out when expansion is excessive.
Pull back side panel out of the rubber mounts and lift off side panel.
Installation: Coat rubber mounts with a rubber lubricant. Install side panel by sliding guides into the rubber mounts. Check for correct seating of seals to the mating parts.