BALANCING FRONT WHEELS
ELECTRONICALLY
(Finish Balancer)

Important!
Precise stationary balancing of wheels
is always required prior to electronic
balancing.

Set up gage for balancing on control
arm end.
Use suitable take-up fork or additonal
fork (see Service Information or Workshop
Equipment and Planning).


Siehe auch 36 00 000
136019 - click to zoom
 
Important!
Calibrate (adjust sensitivity) machine
to operating instructions supplied with
the unit prior to each balancing of a
wheel. Then balance wheel to operating
instructions supplied with the
machine. Balancing must be carried
out on a firm floor (concrete without
basement).
Also refer to Service Information of
Group 36.


Siehe auch 36 00 000
 
If more than 15 grams (0.5 oz.) imbalance
is displayed while finish balancing
a wheel, the possible causes (e.g.
unprecise stationary balancing, center
centering, etc.) must be eliminated prior
to finish balancing and the already
finish balanced wheel rechecked.