CHECKING WHEEL FOR
LATERAL AND RADIAL
RUNOUT
- Wheel Removed -

Use suitable center of pertinent
balancing machine supplier.
1 = Basic flange
2 = Center
3 = Type flange
Also refer to Workshop Equipment and
Planning binder.

136012 - click to zoom
 
Set up Special Tool 36 1 000 on tire
contact surface.
Turn wheel by hand and measure the
maximum tire radial runout.
Max. tire radial runout = 1.6 mm (0.063").

Note:
Special tool must be perpendicular to
the tire contact surface.

136014 - click to zoom
 
Set up Special Tool 36 1 000 on tire
wall.
Turn wheel by hand and measure the
maximum tire lateral runout.
Max. tire lateral runout = 1.6 mm
(0.063").

Note:
Special tool must be perpendicular to
the tire wall.
Do not measure on lettered surface!
If necessary, check rim for radial and
lateral runout.

136017 - click to zoom