BALANCING WHEEL
DYNAMICALLY
- Wheel Removed -

Remove old balance weights, stones in
treads and large pieces of dirt. Check
tire pressure, tires for condition, damage,
flat spots (caused by parking
car too long with hot-rung tires).
If necessary, check radial and lateral
runout of rim and tire.

Use suitable center of pertinent balancing
machine supplier.

1 = Basic flange
2 = Center
3 = Type flange

Also refer to Workshop Equipment and
Planing binder.

Important!
To avoid remounting mistakes, it is
necessary to mount the wheel on the
balancing machine in the same manner
(e.g. valve facing down) as it will
be mounted on the car afterwards.

Balance wheel to operating instructions
supplied with pertinent balancing
machine.

Press tire wall away from rim flange
slightly with a tire clamp (available
form HWB) and insert clips for the
installation of balancing weights.

Remove tire clamp and slide balancing
weight underneath the clip and let it
engage.

Permissible imbalance each side: max.
90 grams. Take up imbalance up to 60
grams with one weight or more than
60 grams with two weights.