BMW Z1
»
12 - Engine Electrical Equipment
»
12 11 000 - Distributor cap - replace
REPLACING DISTRIBUTOR
CAP
Important!
Conform with instructions for working
on the engine electrical system.
Take off cover.
Installation:
Engage cover in the retainer.
Note:
M 20:
Unscrew water pipe on the engine
block.
Pull off shielded plug.
Installation:
The numbering of the elctric lead and
cap must be the same (e.g. 5).
ZS = Ignition coil
Firing Order for M 20:
1-5-3-6-2-4
Installation:
Check firing order.
Unscrew screws.
Take off distributor cap.